Post by Bazman on Jun 24, 2006 1:23:54 GMT
Here is a guide explaining how to create a 360 Gamercard and put it into your signature here on the forum.
1. The first thing to do is choose which site to setup your Gamercard on. I have listed three sites below where this can be done.
1A. www.glop.org/gamercard/#generate
This has a few different card sizes and themes. To create a Gamercard using Glop, enter you gamertag into the green Gamertag box (as shown in the picture below). Then select the theme you wish to use and press Generate.
Standard View
1B. www.mygamercard.net
This has fewer themes than Glop and you cannot see what they look like until you have created it. Creating a card on here is pretty much the same as on Glop, except you can choose the cards colour. Enter you gamertag in the relevent box, select a theme and theme colour from the drop-down lists, then click the Generate Gamercard Code button.
Standard View
1C. www.livecard.net
This has the most options of all the three sites. It has different themes from the other two sites and you can also create custom themes*. This uses the same creation process as on MyGamercard. Enter your gamertag and then choose a theme from the drop-down list, then click the > button. There is also a button to view the avaliable themes and an advanced options button (the locations of these buttons are shown in the pictures below). *You must be registered to the site to create custom themes.
Standard View
Drop-down theme list
Preview themes button location
Advanced Options button location - This is located under the Enter Gamertag and Select Theme boxes. Once pressed it brings up the Output format and Hyperlink to options. The Output format should be left on PNG (as recommended). If you wish, you can choose your Gamercard to be linked to your Xbox.com profile or the Live Card website.
2. After you have chosen a site and generated a gamercard, you can put it in your forum signature. To do this you have to copy the url of the Gamercard into the your Signature box. This is shown after you generate a card, the link you need to copy is the BBCode one. There will either be a button to copy the code or you may have to highlight the code and copy it like that. There are picture examples for each of the sites, to show how the code is shown.
Glop
MyGamercard
Live Card
3. When you have copied the code, its time to paste it into your signature. To do this, go into Modify Profile and paste the code into the Signature box.
Then you are all sorted!
If you have any questions regarding this How To, feel free to PM me.
1. The first thing to do is choose which site to setup your Gamercard on. I have listed three sites below where this can be done.
1A. www.glop.org/gamercard/#generate
This has a few different card sizes and themes. To create a Gamercard using Glop, enter you gamertag into the green Gamertag box (as shown in the picture below). Then select the theme you wish to use and press Generate.
Standard View
1B. www.mygamercard.net
This has fewer themes than Glop and you cannot see what they look like until you have created it. Creating a card on here is pretty much the same as on Glop, except you can choose the cards colour. Enter you gamertag in the relevent box, select a theme and theme colour from the drop-down lists, then click the Generate Gamercard Code button.
Standard View
1C. www.livecard.net
This has the most options of all the three sites. It has different themes from the other two sites and you can also create custom themes*. This uses the same creation process as on MyGamercard. Enter your gamertag and then choose a theme from the drop-down list, then click the > button. There is also a button to view the avaliable themes and an advanced options button (the locations of these buttons are shown in the pictures below). *You must be registered to the site to create custom themes.
Standard View
Drop-down theme list
Preview themes button location
Advanced Options button location - This is located under the Enter Gamertag and Select Theme boxes. Once pressed it brings up the Output format and Hyperlink to options. The Output format should be left on PNG (as recommended). If you wish, you can choose your Gamercard to be linked to your Xbox.com profile or the Live Card website.
2. After you have chosen a site and generated a gamercard, you can put it in your forum signature. To do this you have to copy the url of the Gamercard into the your Signature box. This is shown after you generate a card, the link you need to copy is the BBCode one. There will either be a button to copy the code or you may have to highlight the code and copy it like that. There are picture examples for each of the sites, to show how the code is shown.
Glop
MyGamercard
Live Card
3. When you have copied the code, its time to paste it into your signature. To do this, go into Modify Profile and paste the code into the Signature box.
Then you are all sorted!
If you have any questions regarding this How To, feel free to PM me.
